Our Forklift Tine Changing Station isn’t just about storing the fork extensions when you don’t want to use them. They do that just perfectly. They are also about making it so your people don’t have to lift and move the tine extensions by hand. It takes that weight off of the human and allows you to install and remove them from the seat of the forklift. This safety solution can keep your people in the seat and make them faster when they need that extra reach.
If your workplace has people changing out fork tine extensions regularly, wouldn’t it be best to make this a mechanical operation they handle without getting out of the seat? We can make that a reality with our 2114 Forklift Tine Changing Station.
These bolt to the floor. With the tines in the tray, drive the forklift to the tines and charge the forks into the open bottom tines as far as you can. Lift the tines and watch the forks start to line up. Back up to clear the fork tines as you lift the forks to pick up the fork tine extensions. The heel pin should be clearing the heel of the fork tine itself so it locks itself into place. Once it’s fully lifted you can back out of the Changing Station and get to work. When it’s time to return them to the stand, it’s a reverse of the same process. The result should be that you’ll never need to get out of the seat and you can remain at the controls.
If the goal is safety, we deliver it.
Our open fork tine extensions are the ones needed for this operation. We can supply them up to ten feet long. If you already have your favorite tine extensions, we are happy to supply just the stand. You do need to plan ahead as we would ship these from Germany. It’s possible to ship them via air, but that would at least double the shipping cost.
Reach out today for your Forklift Tine Extension Changing Station today. Call or email to get the order going.
Our Forklift Tine Changing Station isn’t just about storing the fork extensions when you don’t want to use them. They do that just perfectly. They are also about making it so your people don’t have to lift and move the tine extensions by hand. It takes that weight off of the human and allows you to install and remove them from the seat of the forklift. This safety solution can keep your people in the seat and make them faster when they need that extra reach.
If your workplace has people changing out fork tine extensions regularly, wouldn’t it be best to make this a mechanical operation they handle without getting out of the seat? We can make that a reality with our 2114 Forklift Tine Changing Station.
These bolt to the floor. With the tines in the tray, drive the forklift to the tines and charge the forks into the open bottom tines as far as you can. Lift the tines and watch the forks start to line up. Back up to clear the fork tines as you lift the forks to pick up the fork tine extensions. The heel pin should be clearing the heel of the fork tine itself so it locks itself into place. Once it’s fully lifted you can back out of the Changing Station and get to work. When it’s time to return them to the stand, it’s a reverse of the same process. The result should be that you’ll never need to get out of the seat and you can remain at the controls.
If the goal is safety, we deliver it.
Our open fork tine extensions are the ones needed for this operation. We can supply them up to ten feet long. If you already have your favorite tine extensions, we are happy to supply just the stand. You do need to plan ahead as we would ship these from Germany. It’s possible to ship them via air, but that would at least double the shipping cost.
Reach out today for your Forklift Tine Extension Changing Station today. Call or email to get the order going.