CNC Waste Collection Platform for Forklifts
The CNC Waste Collection Platform is intended for just a few operations, but I suspect users will find lots of options for these. This was developed to recycle steel plate after it has been cut on a laser table. But large pallets or many other large flat items can do well being transported on this platform. You can then take it to the final trash or recycle bin and tip it out and into the bin. This will save a ton of time getting fragile remnant plates over to the dumpsters.
Purpose Built CNC Waste Platform
We built this for ourselves in our operations. Today we can deliver it to serve your operations too. when you are working with Laser Tables, Plasma Tables, or Wood CNC machines shaping items out of large sheets, how are you going to move these materials that bend so easily? If you slide them off the the table and on to our CNC Waste Collection Platform, we can make this easy. Take it over to your roll off dumpsters and tip it out in seconds. A whole day of remnants can be handled in a single trip that takes just a few minutes. We do these up to 13’/4m long. If that sounds like a challenge to maneuver, we do them at just over 8’ or 2.5m long(wide while transporting)
Over Build in the Quality
If we are building these for ourselves, you know these are good. We build these with impact proof edges that are reinforced with steel tube. These are around machinery and sizeable. We presume they’ll take hits and we build it so that’s not a problem. If you look at the picture from the rear where it’s tipped forward, you can see the tube structure frame running through the tool. The life span will be long. The structure will remain intact.
These can come with castors as well as sit on the ground on the post. You choose your own adventure for your needs. If your aisle ways would be too narrow for a forklift to come into the end of the CNC machine you’ll be using it with, you can roll these into place.
Options for your CNC Waste Platform
We can do these CNC Waste Platforms in special colors for paint or powder coat if you wanted them to match your factory colors. The option is about $450. We’d have to quote it. Contact us by Email or by Phone to get that going. Zinc dipped (galvanized) is also an option. If you are working in a harsh environment where these could be useful, you can hold off corrosion with this option.
Load Rating on the CNC Waste Platform
The CNC Waste Platform is rated at 4400 lbs. This is relevant for uses with thick steel. It would be quite the task to get plywood or thin sheets of steel to weight this much. And most smaller forklifts for inside of buildings are only rated to 5000 lbs or even 6000 lbs. The platforms themselves can be 1250 lbs for the 13’ long version. By the time you add up the weight of the platform and the capacity, you are pushing the capacity of most of the forklifts. We find this rating and size to maximize most of the combinations found in industry.
Shipping Included and Savings Options
Shipping is Included at the pricing shown. If you have multiple units, we can quote these on a wholesale Ex Works basis and offer shipping options to save you quite a bit of money. The shipping is significant with these. The tariffs in the US are currently (2026) 25% as well. So if you are in Canada, we can also save that by selling direct from Germany.
Contact us at salessales@cranegear.net@cranegear.net to set up your order today!
The CNC Waste Collection Platform is intended for just a few operations, but I suspect users will find lots of options for these. This was developed to recycle steel plate after it has been cut on a laser table. But large pallets or many other large flat items can do well being transported on this platform. You can then take it to the final trash or recycle bin and tip it out and into the bin. This will save a ton of time getting fragile remnant plates over to the dumpsters.
Purpose Built CNC Waste Platform
We built this for ourselves in our operations. Today we can deliver it to serve your operations too. when you are working with Laser Tables, Plasma Tables, or Wood CNC machines shaping items out of large sheets, how are you going to move these materials that bend so easily? If you slide them off the the table and on to our CNC Waste Collection Platform, we can make this easy. Take it over to your roll off dumpsters and tip it out in seconds. A whole day of remnants can be handled in a single trip that takes just a few minutes. We do these up to 13’/4m long. If that sounds like a challenge to maneuver, we do them at just over 8’ or 2.5m long(wide while transporting)
Over Build in the Quality
If we are building these for ourselves, you know these are good. We build these with impact proof edges that are reinforced with steel tube. These are around machinery and sizeable. We presume they’ll take hits and we build it so that’s not a problem. If you look at the picture from the rear where it’s tipped forward, you can see the tube structure frame running through the tool. The life span will be long. The structure will remain intact.
These can come with castors as well as sit on the ground on the post. You choose your own adventure for your needs. If your aisle ways would be too narrow for a forklift to come into the end of the CNC machine you’ll be using it with, you can roll these into place.
Options for your CNC Waste Platform
We can do these CNC Waste Platforms in special colors for paint or powder coat if you wanted them to match your factory colors. The option is about $450. We’d have to quote it. Contact us by Email or by Phone to get that going. Zinc dipped (galvanized) is also an option. If you are working in a harsh environment where these could be useful, you can hold off corrosion with this option.
Load Rating on the CNC Waste Platform
The CNC Waste Platform is rated at 4400 lbs. This is relevant for uses with thick steel. It would be quite the task to get plywood or thin sheets of steel to weight this much. And most smaller forklifts for inside of buildings are only rated to 5000 lbs or even 6000 lbs. The platforms themselves can be 1250 lbs for the 13’ long version. By the time you add up the weight of the platform and the capacity, you are pushing the capacity of most of the forklifts. We find this rating and size to maximize most of the combinations found in industry.
Shipping Included and Savings Options
Shipping is Included at the pricing shown. If you have multiple units, we can quote these on a wholesale Ex Works basis and offer shipping options to save you quite a bit of money. The shipping is significant with these. The tariffs in the US are currently (2026) 25% as well. So if you are in Canada, we can also save that by selling direct from Germany.
Contact us at salessales@cranegear.net@cranegear.net to set up your order today!